Voltage variable gray filter

This site is not updated anymore

PLEASE VISITE THE ARCOPTIX PAGES: www.arcoptix.com/variable_light_attenuator.htm

The Arcoptix electrical adjustable gray filter is a worldwide unique liquid crystal device that permits to control precisely the attenuation of a free space traveling beam with a simple applied voltage. The variable gray filter functions for monochromatic light as well as for unpolarized or polarized white light. It does not significantly alter the spectrum of the incident light and functions almost equally for wavelengths between 350nm and 700nm. The arcoptix variable attenuator can so be considered as an ideal variable gay filter in the visible. Notice that this is not the case for usual liquid crystal attenuators that are designed to attenuate efficiently only a single wavelength! Also in the off state the Arcoptix attenuator shows a higher transmission (for unpolarized light) than usual attenuators and it does not alter the polarization state of the light (polarization maintaining element).

White light transmission of the WA65 for decreasing applied bias.

The Arcoptix variable gray filter has the unique property to be adjusted in milliseconds with a simple square wave bias between 0 and 10V and can so be easily computer controlled via the arcoptix LC driver (with external voltage control). No need to change filters mechanically or to rotate a filter wheel. This device is ideal for application where the intensity needs to be dynamically and continuously controlled.

.

Voltage adjustable in milliseconds

polarization independent and
   polarization maintaining

Attenuation is nearly wavelength
   independent in the visible (gray
   filter).

Aperture up to 40 mm

Attenuation from 0.2 to 10 ^-3

No moving part

Computer addressable

Compact

Ask for a quotation or for more information: info@arcoptix.com

Principle

The variable attenuator is based on a combination of two cells filled a specially developed mixture of liquid crystals with dichroic molecules. The two cells act as a polarizer and analyzer with a kind of variable dichroicity (or specific polarization absorption). By applying a bias the optical axes on these two cells can be tilted and the absorption of the light that propagate normally to the cells is reduced.

The dichroic molecules of the two cells are tilted forward when a bias is applied to the cell.

The absorption of the dichroic molecules has been optimized for the visible spectrum and function ideally between 400 and 650nm. (as it is also the case for many sheet polarizers).
Since the two cells have equal thickness and the two optical axis are perpendicular, the birefringence is perfectly compensated and the polarization state of the light is not altered.

Specs

For an attenuator with a 10mm aperture the specs are given by the table below. For a more detailed information (calibration curves, transmission curves,...please download the PDF file.

Useable aperture

10 mm

Transmission for
Model VA200
Model VA65

From 0.1 to 10^-4 (at 633nm)
From 0.5 to 1.5 ·10^-2 (at 633nm)

Transmission uniformity

Better than 0.3%

Voltage range

0-20 V (square wave)

Wavelength range

350-700 nm (optimal performances between 400 and 650nm

Temperature range

10°-50° C

Cell size

27x27x5mm

Total size with housing

40 x 55x8mm

Transmission curves for different applied voltages (Model VA65)

For more technical information please download the PDF file or contact an arcoptix engineer: info@arcoptix.com

Custom Attenuators

Design and quotes for custom specifications such as attenuation range, switching time, active area, , total size, housing can directly be asked by sending us an email at info@arcoptix.com.